Precor Inner/ Outer Thigh VITALITY
In stock
£4,104.00
View Product Detail
The Vitality Series Inner/Outer Thigh features an easy-adjust start position for both inner and outer thigh exercises. The pivoting thigh pads are angled for improved function and comfort during workouts. Dual foot pegs accommodate users of all sizes. Users can easily engage the add-on weight with a simple push of a lever to increase the work load.
Adjustable Start Position
The start position is designed to fit all users and can be easily adjusted
Two Exercises, One Machine
The unit accommodates movement for both the inner and outer thighs, with easy switching between the two. The user only has to make a simple adjustment with the centre peg.
Dual Foot Pegs
The different placements of the foot pegs ensure proper fit of the unit to each user's needs.
Details
Equipment Features
Weight Stack | Weight plates are 1 inch (25 mm) thick, machined cast weight plates in 10 lb (5 kg) and 15 lb (7 kg) sizes, with fitted nylon bushings to ensure smooth travel on guide rods. Top weight plate is machined cast weight plate designed for a 10 lb (5 kg) starting weight (25 lb / 11 kg on the Leg Press). Precision, lubricated bushings for smooth operation. The magnetic weight selection pin assures positive locking to plates and is secured to weight stack with a thick plastic-coated tether cable. Weight selection pin is color-coded for easy identification. Guide rods are 3/4 inch (19 mm) diameter steel, polished with corrosion-resistant plating for smooth operation and rust prevention. Cables are military spec 5 mm cable (Leg Press: 6.3 mm) coated. Custom end fittings tested to 250,000 cycles under a 4440 lb (200 kg) load. Six machines require no removal of pulleys to route cable. For the other 7 machines all pulleys are pre-assembled, so removal, routing and replacing the pulleys is easy - no hunting for the right pulleys, pulley cover and pulley-mounting hardware. Low starting weight and full weight range accommodate a wide range of users. Weight stack is easily accessible from the seated position. Full-length translucent shrouds enclose the back of the weight stack. Front shroud is full-length with a 3 inch (75 mm) wide slot for access to the weight selection pin. Slotted front shroud meets ASTM and EN0957 safety standards. |
Upholstery | Fabric is premium-quality industrial vinyl with a protective coating that results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Construction features a 4-piece design with a 3/4 inch thick plywood back, 3/4 inch high-density foam base, 3/4 inch high-density foam core and industrial fabric cover. Total thickness is 2.5 inches (65 mm). |
Rubber Feet | Yes |
Accessory Holder(s) | Yes |
Adjustments | Thigh pads rotate 180 degrees to quickly accommodate both inner and outer thigh movements. Movement arm start position can be easily adjusted from the seated position. Hardened plunger and spring-loaded snap-pin assembly position adjustment with easy-grip pull-pin for smooth adjustment. Pull-pin is yellow color-coded for easy identification. |
Instructional placard | Simple step-by-step instructions for users of all levels to help with setup and exercise, including tips to help maximize workouts. |
Bearings and Pivot Points | ABEC-rated bearings for added durability and smooth feel. Size 4 1/2 inch (11 mm). Axles are 25 mm (1 inch) solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement. Pillow block ABEC-grade rotary bearings with grease certs on machines with a cam assembly (Bicep Curl, Tricep Extension, Leg Extension, Leg Curl, Abdominal and Back Extension). |
Water Bottle and Accessories Holder | Top cap secures the front and back shrouds and includes an accessories shelf and 4 inch (102 mm) diameter water bottle holder. |
Pulleys and Cables | Glass-fiber-reinforced nylon pulleys with deep V-groove provide secure cable seating and fluid bearing rotation. |
Frame and Finish | 11 gauge (2.75 mm) 2x4-inch (50 x 100 mm) tubing is bent electroweld steel. Finish is electrostatically applied, heat-cured powder coat for superior durability. Frame available in Experience Titanium (metallic industry silver). |
General Features | Easy-adjust start position. Pivoting thigh pads angled for improved function and comfort. Weight Stack 170 lb (78 kg) with 5 lb add-on weights . |
Equipment Specifications
Standard Shroud Colour | Translucent |
Optional Upholstery Colours | All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate |
Weight Stacks | 2.5 kg |
Weight Stack (kg/lb) | 78 kg |
Workout Area (L x W) | 163 x 176 cm |
Standard Frame Colours | Experience Titanium |
Stocked Upholstery Colours | Black |
Equipment Dimensions & Weight
Length | 168 cm |
Width | 81 cm |
Height | 155 cm |
Equipment Weight | 204 kg |
Delivery Dimensions & Weight
Length | 158 cm |
Width | 86 cm |
Height | 117 cm |
Delivery Weight | 270 kg |
Regulatory
EN957 | EN957 |
ASTM | Yes |
Shipping Fee (UK Mainland)
130.000000
Questions (0)
Reviews
Write Your Own Review
Customers Who Bought This Item Also Bought

Exigo Plate Loaded ISO Lateral Low Row
£2,340.00

2.44 X 3 RUBBER PLATFORM
£1,900.00

Escape Fitness Slamball SBX
£40.18

Son Of The Beast PRO 105lbs/47 kg Black
Special Price
£259.95
(Save 27.59% or £99.05)
Regular Price £359.00
Precor Leg Extension VITALITY
£4,644.00

Exigo Selectorised Lateral Pulldown
£2,994.00