The Vitality Series Leg Extension/Leg Curl is a dual-function machine designed with convenient, easy-to-adjust ankle pad and shin pad adjustment from the seated position. The below-the-knee shin pad design facilitates proper leg curl form. Users can easily engage the add-on weight with a simple push of a lever to increase the work load.
Walk-in Design
All the adjustments on this unit allow the user to clear the path for an easy entry and exit.
Adjustable Start Position
The start position and roller pads easily adjust from the seated position making it easier for the user to get in and fit the unit to their needs once seated.
Counterbalance
The counter-balanced movement arms create a proper motion path and low starting lift weight.
Weight plates are 1 inch (25 mm) thick, machined cast weight plates in 10 lb (5 kg) and 15 lb (7 kg) sizes, with fitted nylon bushings to ensure smooth travel on guide rods.Top weight plate is machined cast weight plate designed for a 10 lb (5 kg) starting weight (25 lb / 11 kg on the Leg Press). Precision, lubricated bushings for smooth operation. The magnetic weight selection pin assures positive locking to plates and is secured to weight stack with a thick plastic-coated tether cable. Weight selection pin is color-coded for easy identification. Guide rods are 3/4 inch (19 mm) diameter steel, polished with corrosion-resistant plating for smooth operation and rust prevention. Cables are military spec 5 mm cable (Leg Press: 6.3 mm) coated. Custom end fittings tested to 250,000 cycles under a 4440 lb (200 kg) load. Six machines require no removal of pulleys to route cable. For the other 7 machines all pulleys are pre-assembled, so removal, routing and replacing the pulleys is easy - no hunting for the right pulleys, pulley cover and pulley-mounting hardware. Low starting weight and full weight range accommodate a wide range of users. Weight stack is easily accessible from the seated position. Full-length translucent shrouds enclose the back of the weight stack. Front shroud is full-length with a 3 inch (75 mm) wide slot for access to the weight selection pin. Slotted front shroud meets ASTM and EN0957 safety standards.
Upholstery
Fabric is premium-quality industrial vinyl with a protective coating that results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Construction features a 4-piece design with a 3/4 inch thick plywood back, 3/4 inch high-density foam base, 3/4 inch high-density foam core and industrial fabric cover. Total thickness is 2.5 inches (65 mm).
Rubber Feet
Yes
Accessory Holder(s)
Yes
Adjustments
Back pad adjustment features custom-molded sleeve-tube inserts inside attractive oval-shaped steel tubing. Ensures stable, low-friction seat adjustments. Viewing hole and etched numbers on sleeve-tube for accurate positioning of seat and back pad. Hardened plunger and spring-loaded snap-pin assembly position adjustment with easy-grip pull-pin for smooth adjustment. Pull-pin is yellow color-coded for easy identification. Slip-resistant rubber grip handle assembly with machine alloy end-cap. Push grips are over-sized to 1.5 inch (39 mm) diameter. Pull grips and handlebars are 1.25 inch (32 mm) diameter.
Instructional placard
Simple step-by-step instructions for users of all levels to help with setup and exercise, including tips to help maximize workouts.
Bearings and Pivot Points
ABEC-rated bearings for added durability and smooth feel. Size 4 1/2 inch (11 mm). Axles are 25 mm (1 inch) solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement. Pillow block ABEC-grade rotary bearings with grease certs on machines with a cam assembly (Bicep Curl, Tricep Extension, Leg Extension, Leg Curl, Abdominal and Back Extension).
Water Bottle and Accessories Holder
Top cap secures the front and back shrouds and includes an accessories shelf and 4 inch (102 mm) diameter water bottle holder.
Pulleys and Cables
Glass-fiber-reinforced nylon pulleys with deep V-groove provide secure cable seating and fluid bearing rotation.
Frame and Finish
11 gauge (2.75 mm) 2x4-inch (50 x 100 mm) tubing is bent electroweld steel. Finish is electrostatically applied, heat-cured powder coat for superior durability. Frame available in Experience Titanium (metallic industry silver).
General Features
Two machines in one: leg extension and seated leg curl. Shin pad design for superior leg curl movement. Easy ankle pad and start adjustment from seated position. Weight Stack 240 lb (110 kg) with 5 lb add-on system.
Equipment Specifications
Incremental Add-on Weight
2.5 kg
Standard Shroud Colour
Translucent
Optional Upholstery Colours
All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate
