Precor Leg Press/ Calf Extension VITALITY
The Vitality Series Leg Press/Calf Extension features an articulating foot pad that stays vertical to mimic a squat movement and allows for full extension during calf exercise. Ratcheting seat back allows for desired start position. Large, non-slip, wear-resistant rubber foot pad allows users to easily perform both exercises. Users can easily engage the add-on weight with a simple push of a lever to increase the work load.
This convenient design allows users to enter and exit on either side of the unit, a very beneficial feature when space is an issue.
The large foot platform allows users of all sizes to adjust placement as needed, as well as having the space to move into different positions for exercise variety.
The design of the foot pad assembly ensures that there is a smooth natural path of motion, much like that of a standing squat.
|Weight Stack||Weight plates are 1 inch (25 mm) thick, machined cast weight plates in 10 lb (5 kg) and 15 lb (7 kg) sizes, with fitted nylon bushings to ensure smooth travel on guide rods. Top weight plate is machined cast weight plate designed for a 10 lb (5 kg) starting weight (25 lb / 11 kg on the Leg Press). Precision, lubricated bushings for smooth operation. The magnetic weight selection pin assures positive locking to plates and is secured to weight stack with a thick plastic-coated tether cable. Weight selection pin is color-coded for easy identification. Guide rods are 3/4 inch (19 mm) diameter steel, polished with corrosion-resistant plating for smooth operation and rust prevention. Cables are military spec 5 mm cable (Leg Press: 6.3 mm) coated. Custom end fittings tested to 250,000 cycles under a 4440 lb (200 kg) load. Six machines require no removal of pulleys to route cable. For the other 7 machines all pulleys are pre-assembled, so removal, routing and replacing the pulleys is easy - no hunting for the right pulleys, pulley cover and pulley-mounting hardware. Low starting weight and full weight range accommodate a wide range of users. Weight stack is easily accessible from the seated position. Full-length translucent shrouds enclose the back of the weight stack. Front shroud is full-length with a 3 inch (75 mm) wide slot for access to the weight selection pin. Slotted front shroud meets ASTM and EN0957 safety standards.|
|Upholstery||Fabric is premium-quality industrial vinyl with a protective coating that results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Construction features a 4-piece design with a 3/4 inch thick plywood back, 3/4 inch high-density foam base, 3/4 inch high-density foam core and industrial fabric cover. Total thickness is 2.5 inches (65 mm).|
|Adjustments||Back pad adjustment features custom-molded sleeve-tube inserts inside attractive oval-shaped steel tubing. Ensures stable, low-friction seat adjustments. Viewing hole and etched numbers on sleeve-tube for accurate positioning of seat and back pad. Hardened plunger and spring-loaded snap-pin assembly position adjustment with easy-grip pull-pin for smooth adjustment. Pull-pin is yellow color-coded for easy identification. Slip-resistant rubber grip handle assembly with machine alloy end-cap. Push grips are over-sized to 1.5 inch (39 mm) diameter. Pull grips and handlebars are 1.25 inch (32 mm) diameter.|
|Instructional placard||Simple step-by-step instructions for users of all levels to help with setup and exercise, including tips to help maximize workouts.|
|Bearings and Pivot Points||ABEC-rated bearings for added durability and smooth feel. Size 4 1/2 inch (11 mm). Axles are 25 mm (1 inch) solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement. Pillow block ABEC-grade rotary bearings with grease certs on machines with a cam assembly (Bicep Curl, Tricep Extension, Leg Extension, Leg Curl, Abdominal and Back Extension).|
|Water Bottle and Accessories Holder||Top cap secures the front and back shrouds and includes an accessories shelf and 4 inch (102 mm) diameter water bottle holder.|
|Pulleys and Cables||Glass-fiber-reinforced nylon pulleys with deep V-groove provide secure cable seating and fluid bearing rotation.|
|Frame and Finish||11 gauge (2.75 mm) 2x4-inch (50 x 100 mm) tubing is bent electroweld steel. Finish is electrostatically applied, heat-cured powder coat for superior durability. Frame available in Experience Titanium (metallic industry silver).|
|General Features||Walk-through design. Articulating foot pad stays vertical to mimic a squat movement. Weight Stack 295 lb (135 kg) with 7.5 lb add-on system.|
|Incremental Add-on Weight||2.5 kg|
|Standard Shroud Colour||Translucent|
|Optional Upholstery Colours||All Spice|
|Weight Stack (kg/lb)||135 kg|
|Workout Area (L x W)||180 x 109 cm|
|Standard Frame Colours||Experience Titanium|
|Stocked Upholstery Colours||Black|
Equipment Dimensions & Weight
|Equipment Weight||287 kg|
Delivery Dimensions & Weight
|Delivery Weight||249 kg|