Precor Pulldown/ Seated Row VITALITY
The Vitality Series Pulldown/Seated Row is a dual-function machine with lat pull-down and mid-row exercise positions. Features an easy-to-adjust thigh hold-down pad, extended seat and foot bar to facilitate both exercises. Users can easily engage the add-on weight with a simple push of a lever to increase the work load.
The thigh hold-down pad features an easy-to-adjust mechanism to accommodate all users.
This unit accommodates both the lat pull-down and mid-row exercise movements.
The row bar rests on a storage plate with a protective coating so that the bar is out of the way when the pull-down is being used. The protective coating protects the storage plate from scratches and dents.
|Weight Stack||Weight plates are 1 inch (25 mm) thick, machined cast weight plates in 10 lb (5 kg) and 15 lb (7 kg) sizes, with fitted nylon bushings to ensure smooth travel on guide rods. Top weight plate is machined cast weight plate designed for a 10 lb (5 kg) starting weight (25 lb / 11 kg on the Leg Press). Precision, lubricated bushings for smooth operation. The magnetic weight selection pin assures positive locking to plates and is secured to weight stack with a thick plastic-coated tether cable. Weight selection pin is color-coded for easy identification. Guide rods are 3/4 inch (19 mm) diameter steel, polished with corrosion-resistant plating for smooth operation and rust prevention. Cables are military spec 5 mm cable (Leg Press: 6.3 mm) coated. Custom end fittings tested to 250,000 cycles under a 4440 lb (200 kg) load. Six machines require no removal of pulleys to route cable. For the other 7 machines all pulleys are pre-assembled, so removal, routing and replacing the pulleys is easy - no hunting for the right pulleys, pulley cover and pulley-mounting hardware. Low starting weight and full weight range accommodate a wide range of users. Weight stack is easily accessible from the seated position. Full-length translucent shrouds enclose the back of the weight stack. Front shroud is full-length with a 3 inch (75 mm) wide slot for access to the weight selection pin. Slotted front shroud meets ASTM and EN0957 safety standards.|
|Upholstery||Fabric is premium-quality industrial vinyl with a protective coating that results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Construction features a 4-piece design with a 3/4 inch thick plywood back, 3/4 inch high-density foam base, 3/4 inch high-density foam core and industrial fabric cover. Total thickness is 2.5 inches (65 mm).|
|Adjustments||Extra long seat at a fixed seat height. Thigh roller pads can adjustment easily from a seated position to accommodate short to tall users. Hardened plunger and spring-loaded snap-pin assembly position adjustment with easy-grip pull-pin for smooth adjustment. Pull-pin is yellow color-coded for easy identification. Slip-resistant rubber grip handle assembly with machine alloy end-cap. Push grips are over-sized to 1.5 inch (39 mm) diameter. Pull grips and handlebars are 1.25 inch (32 mm) diameter.|
|Instructional placard||Simple step-by-step instructions for users of all levels to help with setup and exercise, including tips to help maximize workouts.|
|Bearings and Pivot Points||ABEC-rated bearings for added durability and smooth feel. Size 4 1/2 inch (11 mm). Axles are 25 mm (1 inch) solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement. Pillow block ABEC-grade rotary bearings with grease certs on machines with a cam assembly (Bicep Curl, Tricep Extension, Leg Extension, Leg Curl, Abdominal and Back Extension).|
|Water Bottle and Accessories Holder||Top cap secures the front and back shrouds and includes an accessories shelf and 4 inch (102 mm) diameter water bottle holder.|
|Pulleys and Cables||Glass-fiber-reinforced nylon pulleys with deep V-groove provide secure cable seating and fluid bearing rotation.|
|Frame and Finish||11 gauge (2.75 mm) 2x4-inch (50 x 100 mm) tubing is bent electroweld steel. Finish is electrostatically applied, heat-cured powder coat for superior durability. Frame available in Experience Titanium (metallic industry silver).|
|General Features||2 machines in one: lat pulldown and seated row. Easy-to-adjust thigh hold-down pads. Extended seat and foot bar. Weight Stack 220 lb (110 kg) with 7.5 lb add-on system.|
|Incremental Add-on Weight||3.5 kg|
|Standard Shroud Colour||Translucent|
|Optional Upholstery Colours||All Spice|
|Weight Stack (kg/lb)||100 kg|
|Workout Area (L x W)||193 x 150 cm|
|Standard Frame Colours||Experience Titanium|
|Stocked Upholstery Colours||Black|
Equipment Dimensions & Weight
|Equipment Weight||226 kg|
Delivery Dimensions & Weight
|Delivery Weight||240 kg|